Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This is a guide on how to manually install Ansys, a piece of software used in the School of Engineering. This guide is for anyone that has to perform this installation manually; there is a package located at \\titan\software$\Engineering\ANSYS\v1507 that contains all the necessary components and a batch file to perform the install.

Step-by-step guide

  1. Browse to installer at \\titan\ase-softdist$\ANSYS1507
  2. Click Install Ansys Products
  3. Set default install path
  4. Uncheck ANSYS Geometry Interfaces (which are installs that can be done separately)
  5. Input licensing info on the next screen
  6. Licensing info all from https://wikis.uit.tufts.edu/confluence/display/TuftsUITResearchComputing/Network+Concurrent+Licenses
    1. Make sure to click 3-server (redundant triad)
    2. Run install (takes approximately 30 minutes)

 

 

 

 

1.       Run install (takes approximately 30 minutes)

  • No labels

Information on the Tufts IT Knowledgebase is intended for IT Professionals at Tufts.
If you have a question about a Tufts IT service or computer/account support, please contact your IT support group.