External Memory

You can directly save a scanned document in the external memory connected to this machine. To use this
function, check that the external memory is connected to the USB connector of this machine, select the [KonicaMinoltaDocumentationProject:System
User Box] tab, and then press External Memory. Otherwise, on the screen that is displayed when the
external memory device has been connected to the USB connector, press [KonicaMinoltaDocumentationProject:Save a document to External
Memory.].

Reference

A function to save a document to the external memory or to save a document stored in the external
memory to a User Box is set to OFF (cannot be saved) in the factory default. In addition, it is set to OFF
(cannot be saved) by the user function settings when user authentication is enabled.

To save a document in external memory, change the setting to enable you to save a document in Administrator Settings.
The function to save a document in external memory is available only when a Hard Disk is installed.

Browser not supported