Page Comparison

...

Connecting an Audio Call to a VideoconferenceVideo Conference Using the Bridge

...

Step 1: Create an Endpoint

1. From the Main Menu, click Endpoints.
2. Click Add H.323.
3. Image Added
4. Complete the following fields:
   1. Image Added
   2. Name - enter a name for the conference call. (e.g. SAT Audio Bridge)
   3. Address - enter the full path of the dial in number (e.g. 03118005018979)
   4. DTMF Sequence - enter the Host Code and its associated PIN
      1. Example: --,,6274553#,,7528#1,,,# (be sure to enter all of the commas and '#' signs)
       
5. Click Update Conference on the lower left of the screen.

...

1. Endpoint.

Step 2: Adding the Endpoint to the Bridge

1. From the Main Menu, click Conferences.
2. Locate the desired conference from the list of conferences. You may need to page over in order to locate it.
3. When found, click onto the name of the desired conference to open.
4. Click Add Participant.
5. Scroll down. Available endpoints are listed at the bottom of the screen.  Using the check boxes, select the Endpoint you just created.
6. Image Added
7. Click Call Selected to connect.