Page Comparison

...

• Can we bypass "Track Account" login to login as admin at the touch panel?
• Does sending e-mail require a scanner e-mail account?
  • *Answer:*Currently since the Tufts SMTP server allows sending without authentication you do not need an account to configure the copiers to send email. However a best practice in the future would be to create a scanner service account (either a Trumpeter email account or a Exchange Account (disable interactive login) and enable SSL/TLS to ensure email traffic is encrypted on the Tufts network.
• Are there any documents stored locally during scan to usb, e-mail or network share?
• How to reset the admin password if it's lost, without resetting entire system?
  • Answer: According to Konica Security Operations Manual, "If the Administrator Password is forgotten, it must be set again by the Service Engineer."

    Untested Solution from Old Konica Minolta Copiers To reset the admin password:
    1. Enter Service mode by pressing the Utility key then the Details button followed by pressing stop 0, 0, stop 0, 1.
    2. Press stop, 0 then Clear to access the admin security mode. This will allow changing the admin password back to the default setting of
    12345678 or it can be changed to a unique password

• Can we use command-lines to deploy the driver silently?
  • If 
• How do we program the department code into the printer driver?
• If you are scanning to a shared network drive, a proc account is required. What is the best practice for locking down a proc account?
  • Scanners should have their own AD service account so that they
    can be audited and the account can be disabled if compromised.
  • Service account should be denied Interactive Logon. (Can be done through GPO in a separate OU). This prevents service account from being able to log into local computers or through Remote Desktop Connection.
  • Account should have least administrative privileges needed perform job. Only change access to folder it needs to scan to or list access to root directory if scanning to specific folder.
  • Account should have complex password and set not to expire however password should be changed on all copiers in a cycle.

• When and how are firmware updates done?
• Can monitoring of these devices be centrally logged?
  • Can be done via Konica PageScope Device Manager software

Known Issues

• When configuring scanning, the scanner picks up tufts.edu as the domain and attempts to authenticate the account using tufts.edu/utln
  • tufts.edu must be corrected to Tufts or blank?
• When installing the Universal print driver manually, the driver configures the port to print to the IP address of the printer.
  • Best practice is to print to a DNS Hostname in case the printer moves, or the subnet changes.

...